Call: +44 (0) 208 684 8262 | Email: Sales@orbic.co.uk

  • Orbic Van Delivery

  • Find our Trade Counter

  • Get in touch

  • 24/7 emergency callout

TYGRIS  |  SKU: R225

TYGRIS Non-Silicone Mould Release 400 ml

TYGRIS Non-Silicone Mould Release is for use in the Plastic Moulding industry, where further finishing processes are to be carried out. With a non-chlorinated, solvent-free vegetable oil base, it is stable up to a temperature of 200°C. Conventional detergents easily remove any residue of this benign, non-toxic agent, allowing for further product finishing.

Benefits:

Non-silicone content to allow for overpainting - lacquering - overprinting - gluing or welding;
Excellent surface slip;
Effective where a high gloss finish is desirable;
Easily removed by conventional detergents


Consult the safety data sheet prior to use - suitable Personal Protection Equipment should be worn. Ensure surface to be coated is clean and dry. Shake can well before use and spray a light even coat over the surface from a distance of 20-30cm. Allow to dry before placing components into use. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only


Delivery and Shipping

We’ve got you covered! If you're within our delivery area, expect one of our friendly drivers in our branded vans. If you're just a bit further out, don’t worry FedEx will handle your delivery with the same care and speed!

We aim to deliver within 24 hours of receiving your order, so you get what you need, fast! If it's urgent, just give us a call or drop us a message we’ll do our best to speed things up even more!

New products being added daily!

  • Brand
    TYGRIS
  • Item Size
    400 ml
  • Quality
    Mid Range

For Technical Support

If you need technical support, our team is ready to assist you! Please give us a call or send us an email, and we’ll provide the help you need as quickly as possible.

Call: +44 (0)20 8684 8262

Email: sales@orbic.co.uk

TYGRIS

TYGRIS Non-Silicone Mould Release 400 ml

TYGRIS Non-Silicone Mould Release is for use in the Plastic Moulding industry, where further finishing processes are to be carried out. With a non-chlorinated, solvent-free vegetable oil base, it is stable up to a temperature of 200°C. Conventional detergents easily remove any residue of this benign, non-toxic agent, allowing for further product finishing.

Benefits:

Non-silicone content to allow for overpainting - lacquering - overprinting - gluing or welding;
Excellent surface slip;
Effective where a high gloss finish is desirable;
Easily removed by conventional detergents


Consult the safety data sheet prior to use - suitable Personal Protection Equipment should be worn. Ensure surface to be coated is clean and dry. Shake can well before use and spray a light even coat over the surface from a distance of 20-30cm. Allow to dry before placing components into use. Dispose of used aerosols in line with local and national regulations.

*Image for illustrative purposes only

View product